36、出现如下提示：
　　
　　q Profile qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqq
　　
　　The information shown below is your profile for installing Solaris software.
　　It reflects the choices you''ve made on previous screens.
　　
　　=======================================================
　　
　　- Installation Option: Initial
　　x Boot Device: c1t0d0
　　x Client Services: None
　　x
　　x Locales: Simplified Chinese EUC
　　x Simplified Chinese GB18030
　　x Simplified Chinese GBK
　　x Simplified Chinese UTF-8
　　x Traditional Chinese (Hong Kong) BIG
　　x Traditional Chinese (Hong Kong) UTF
　　x Traditional Chinese BIG5
　　x Traditional Chinese EUC
　　x Traditional Chinese UTF-8
　　v
　　
　　qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　F2_Continue F4_Change F5_Exit F6_Help
　　
　　按F2继续安装；
　　
　　37、出现如下提示：
　　q Warning qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqq
　　
　　
　　The following disk configuration condition(s) have been
　　detected. Errors must be fixed to ensure a successful
　　installation. Warnings can be ignored without causing the
　　installation to fail.
　　
　　WARNING: Unused disk space (c1t0d0)
　　
　　WARNING: CHANGING DEFAULT BOOT DEVICE
　　You have either explicitly changed the default boot device, or
　　accepted the default to "Reconfigure EEPROM". In either case,
　　the system''s EEPROM will be changed so it will always boot
　　Solaris from the device that you''ve specified. If this is not
　　what you had in mind, go back to the disk selection screens and
　　change the "Reconfigure EEPROM" setting.
　　
　　qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　F2_OK F5_Cancel
　　
　　按F2继续安装；
　　
　　38、出现如下提示：
　　
　　q Reboot After Installation? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　
　　After Solaris software is installed, the system must be rebooted. You can
　　choose to have the system automatically reboot, or you can choose to
　　manually reboot the system if you want to run scripts or do other
　　customizations before the reboot. You can manually reboot a system by using
　　the reboot(1M) command.
　　
　　
　　[X] Auto Reboot
　　[ ] Manual Reboot
　　
　　
　　
　　qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　F2_Begin Installation F5_Cancel
　　
　　设置安装结束后，自动重启动。按F2继续安装；
　　
　　39、出现如下提示：
　　
　　Preparing system for Solaris install
　　
　　Configuring disk (c1t0d0)
　　- Creating Solaris disk label (VTOC)
　　
　　Creating and checking UFS file systems
　　- Creating / (c1t0d0s0)
　　- Creating /var (c1t0d0s1)
　　- Creating /opt (c1t0d0s5)
　　- Creating /usr (c1t0d0s6)
　　
　　Solaris Initial Install
　　
　　
　　MBytes Installed: 52.22
　　MBytes Remaining: 1528.16
　　
　　Installing: Core Solaris Devices
　　
　　
　　
　　
　　|
　　| | | | | |
　　0 20 40 60 80 100
　　
　　（正在安装Solaris Software 1/2 CD盘，请等待）
　　
　　
　　Solaris 9 software installation partially failed
　　
　　Solaris 9 packages partially installed
　　SUNWidecr
　　
　　Customizing system files
　　- Mount points table (/etc/vfstab)
　　- Network host addresses (/etc/hosts)
　　
　　Cleaning devices
　　
　　Customizing system devices
　　- Physical devices (/devices)
　　- Logical devices (/dev)
　　
　　Installing boot information
　　- Installing boot blocks (c1t0d0s0)
　　- Updating system firmware for automatic rebooting
　　
　　Installation log location
　　- /a/var/sadm/system/logs/install_log (before reboot)
　　- /var/sadm/system/logs/install_log (after reboot)
　　
　　Install of CD 1 complete. The system will ask you for CD 2 after you reboot.
　　Executing SolStart postinstall phase...
　　Executing finish script "patch_finish"...
　　
　　
　　Finish script patch_finish execution completed.
　　Executing JumpStart postinstall phase...
　　
　　The begin script log ''begin.log''
　　is located in /var/sadm/system/logs after reboot.
　　
　　The finish script log ''finish.log''
　　is located in /var/sadm/system/logs after reboot.
　　
　　syncing file systems... done
　　rebooting...
　　Resetting ...
　　
　　
　　*** FCode LP8000 PCI_Bus (lpfc) Version 1.31a5 ***
　　
　　
　　*** FCode LP8000 PCI_Bus (lpfc) Version 1.31a5 ***
　　
　　
　　Sun Fire 880, No Keyboard
　　Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
　　OpenBoot 4.7.5, 4096 MB memory installed, Serial #53419230.
　　Ethernet address 0:3:ba:2f:1c:de, Host ID: 832f1cde.
　　
　　Rebooting with command: boot
　　Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e01042dc11,0:a File an
　　d args:
　　SunOS Release 5.9 Version Generic_112233-03 64-bit
　　Copyright 1983-2002 Sun Microsystems, Inc. All rights reserved.
　　Use is subject to license terms.
　　configuring IPv4 interfaces: ce0.
　　Hostname: rac2
　　Configuring /dev and /devices
　　Configuring the /dev directory (compatibility devices)
　　The system is coming up. Please wait.
　　checking ufs filesystems
　　/dev/rdsk/c1t0d0s5: is clean.
　　Configuring network interface addresses: ce0 eri0 ge0.
　　starting rpc services: rpcbind done.
　　
　　On this screen you can create a root password.
　　
　　A root password can contain any number of characters, but only the first eight
　　characters in the password are significant. (For example, if you create
　　`a1b2c3d4e5f6'' as your root password, you can use `a1b2c3d4'' to gain root
　　access.)
　　
　　You will be prompted to type the root password twice; for security, the password
　　will not be displayed on the screen as you type it.
　　
　　> If you do not want a root password, press RETURN twice.
　　
　　Root password:
　　
　　
　　Press Return to continue.
　　
　　40、系统提示你设置超级用户root的密码，本例中，输入root123后，出现如下提示：
　　
　　On this screen you can create a root password.
　　
　　A root password can contain any number of characters, but only the first eight
　　characters in the password are significant. (For example, if you create
　　`a1b2c3d4e5f6'' as your root password, you can use `a1b2c3d4'' to gain root
　　access.)
　　
　　You will be prompted to type the root password twice; for security, the password
　　will not be displayed on the screen as you type it.
　　
　　> If you do not want a root password, press RETURN twice.
　　
　　Root password:
　　
　　
　　Re-enter your root password.
　　
　　
　　Press Return to continue.