6、出现如下提示：
　　q The Solaris Installation Program qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　
　　The Solaris installation program is divided into a series of short sections
　　where you''ll be prompted to provide information for the installation. At
　　the end of each section, you''ll be able to change the selections you''ve
　　made before continuing.
　　
　　About navigation...
　　- The mouse cannot be used
　　- If your keyboard does not have function keys, or they do not
　　respond, press ESC; the legend at the bottom of the screen
　　will change to show the ESC keys to use for navigation.
　　
　　qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　F2_Continue F6_Help
　　
　　该提示告诉安装人员，Solaris的安装分为好几部分，每一部分后面都需要你进行确认，如果发现
　　有错，可以更改你先前输入的信息
　　按F2键继续安装；
　　
　　7、出现如下提示：
　　q Identify This System qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　
　　On the next screens, you must identify this system as networked or
　　non-networked, and set the default time zone and date/time.
　　
　　If this system is networked, the software will try to find the information
　　it needs to identify your system; you will be prompted to supply any
　　information it cannot find.
　　
　　> To begin identifying this system, press F2.
　　
　
　　qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　F2_Continue F6_Help
　　
　　该提示告诉安装人员，要开始定义系统的名字，网络及掩码，时区及时间
　　按F2键继续安装；
　　
　　
　　8、出现如下提示：
　　
　　q Network Connectivity qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　
　　Specify Yes if the system is connected to the network by one of the Solaris
　　or vendor network/communication Ethernet cards that are supported on the
　　Solaris CD. See your hardware documentation for the current list of
　　supported cards.
　　Specify No if the system is connected to a network/communication card that
　　is not supported on the Solaris CD, and follow the instructions listed under
　　Help.
　　
　　
　　Networked
　　qqqqqqqqq
　　[X] Yes
　　[ ] No
　　
　　qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　F2_Continue F6_Help
　　
　　安装程序提示系统是否连接了网络？使用上下箭头键移动，在合适的位置停止后，按空格键，
　　选中该选项；
　　在我们的安装中，需要网络功能，因此按F2键继续安装；
　　
　　9、出现如下提示：
　　
　　q DHCP qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqq
　　
　　On this screen you must specify whether or not this system should use DHCP
　　for network interface configuration. Choose Yes if DHCP is to be used, or
　　No if the interfaces are to be configured manually.
　　
　　NOTE: DHCP support will not be enabled, if selected, until after the system
　　reboots.
　　
　　Use DHCP
　　qqqqqqqq
　　[ ] Yes
　　[X] No
　　
　　
　　
　　
　　
　　qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　F2_Continue F6_Help
　　
　　提示是否需要使用DHCP来配置主机的IP地址；
　　在我们的安装中，不使用DHCP功能，因此按F2键继续安装；
　　
　　10、出现提示：
　　q Primary Network Interface qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　
　　On this screen you must specify which of the following network adapters is
　　the system''s primary network interface. Usually the correct choice is the
　　lowest number. However, do not guess; ask your system administrator if
　　you''re not sure.
　　
　　> To make a selection, use the arrow keys to highlight the option and
　　press Return to mark it [X].
　　
　　
　　Primary network interface
　　qqqqqqqqqqqqqqqqqqqqqqqqq
　　[X] ce0
　　[ ] ge0
　　[ ] eri0
　　[ ] fcip0
　　
　　qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
qqqqqqqqqqqqqqqqqqqqqqqqqqqq
　　F2_Continue F6_Help
　　选择主网卡（Primary Network Interface）
　　在我们的安装例子中，使用上下箭头键移动光标，移动到eri0处，按空格键选中该网卡，
　　按F2键继续安装；