To mount an EXT2FS partition you first need to identify logical device name of the partition. Execute /usr/bin/prtpart without arguments to see the physical device name of your harddisk. It will be of the form: /dev/rdsk/cNdNp0. This will also display information about the entire partition table.

Note: For more info on prtpart execute prtpart -help

Now execute: /usr/bin/prtpart /dev/rdsk/cNdNp0 -ldevs

to list out all the logical devices and the partition types. Your Linux partitions will be listed as "Linux Native".

Now execute: mount -F ext2fs <logical device name> <mountpoint>

to mount the EXT2FS partition.

主要命令： prtpart /dev/dsk/c0d0p0 -ldevs

输出 ： bash-3.00# prtpart /dev/rdsk/c0d0p0 -ldevs

Fdisk information for device /dev/rdsk/c0d0p0

NOTE

/dev/dsk/c0d0p0 - Physical device referring to entire physical disk

/dev/dsk/c0d0p1 - p4 - Physical devices referring to the 4 primary partitions

/dev/dsk/c0d0p5 ... - Virtual devices referring to logical partitions

Virtual device names can be used to access EXT2 and NTFS on logical partitions

/dev/dsk/c0d0p1 IFS: NTFS
/dev/dsk/c0d0p2 WIN95 Extended(LBA)
/dev/dsk/c0d0p5 WIN95 FAT32(Upto 2047GB)
/dev/dsk/c0d0p6 IFS: NTFS
/dev/dsk/c0d0p7 Linux native
/dev/dsk/c0d0p8 Linux swap

/dev/dsk/c0d0p3 Solaris x86

然后：

bash-3.00# mount -F ext2fs /dev/dsk/c0d0p7 /mnt
bash-3.00# xlsmounts
 PHYSICAL DEVICE                 LOGICAL DEVICE      FS    PID         ADDR Mounted on
 /dev/dsk/c0d0p0                /dev/dsk/c0d0p7  ext2fs   1661  127.0.0.1:/ /mnt
bash-3.00#

大功告成！用了我一个多小时的时间找这个东西，特此分享！

测试平台：Sun Solaris 10 X86, OpenSUSE 10.0.2

HOW TO Install

1) Install the FSWpart package

  Download http://www.belenix.org/binfiles/FSWpart.tar.gz
  Uncompress:  gunzip -c FSWpart.tar.gz | tar xvf -
  Install:  pkgadd -d . FSWpart

2) Install the FSWfsmisc package

  Download http://www.belenix.org/binfiles/FSWfsmisc.tar.gz
  Uncompress:  gunzip -c FSWfsmisc.tar.gz | tar xvf -
  Install:  pkgadd -d . FSWfsmisc