服务器 频道

Solaris10_x86安装步骤

  【IT168 服务器学院】安装设备:
  DELL GX620
  ViewSonic:VE710b
  TP_Link:TF-3239DL(RTL8139)
  GF 6200TC 128MB DDR PCI-E
  CPU 类型 Intel 奔腾4
  标称频率 3200MHz
  CPU 描述 含超线程(HT)技术的英特尔 奔腾4 处理器521
  主板芯片 Intel 945G
  内存类型 DDRII
  内存大小 512MB
  硬盘容量 160GB
  硬盘描述 串行-ATA技术
  光驱类型 康宝
  光驱描述 16X倍速
  显卡描述 Intel GMA950 和一块GeForce6200(为主显卡)
  声卡描述 集成AC
  网卡描述 1000Mbps以太网卡
  
  
  #将disk1放入,光盘启动。
  #引导至
  GNU GRUB version 0.95 (640K lower /1046043K upper memory)
  %Solaris  上下箭头可以选择至高亮
  Solaris Serial Console ttya
  Solaris Serial Console ttyb (for lx50,v60 and v65x)
  
  Use the arrow up and arrow down keys to select which entry is highlighted.
  Press enter to boot the selected OS,''e''to edit the commands before booting, or ''c'' for a command-line.
  The highlighted entry will be booted automatically in 60 seconds.
  break 中断 (ctrl+break恢复中断)
  #开始引导mini system
  
  SunOS Release 5.10 Version Generic_118844-26 32-bit
  Use is subject to license terms.
  Configureing devices.
  
  1. Solaris Interactive (default)  蓝屏状态下进行交互方式的基础配置
  %2. Custom JumpStart 窗口ugi方式的基础配置
  3. Solaris Interactive Text (Desktop session)
  4. Solaris Interactive Text (Console session)
  5. Apply driver updates
  6. Single user shell
  Enter the number of yhour choice.
  Selected:2
  Custom Jumpstart
  Notice: rtls0 -- link down
  using install cd in /dev/dsk/c0t0d0p0
  Usiing RPC Bootparams for network configuration information.
  Attempting to configure interface rtls0...
  Skipped interface rtls0
  Attempting to configure interface bge0...
  Skipped interface bge0
  Beginning system identificiation...
  Searching for configuration file(s)...
  Search complete.
  Proposed Window System Configuration For Installation:
  Video Device: Nvidia Corporation Geforce 6200 TurboCache(TM)
  Video Driver: XF86-NV
  Resolution/Colors: 1024x768-256 colors @ 85Hz
  Screem Size: 17-inch(43cm)
  Monitor Type: Plug and Play Mfreq 17inch VSC3919 (up to 1280x1024@75Hz)
  Keyboard Type: Generic US-English(104-key)
  Pointing Device: Generic USB Mouse (3 Button)
  %Press <ENTER> to accept proposed configuration
  or    <ESC>   to change proposed configuration
  or    <SPACE> to pause
  <<<timeout in 30 seconds>>>

  #系统进入UGI界面,进行WEB START 的语言设置选择.
  0.English
  1.French
  2.German
  3.Italian
  4.Japan
  5.Korean
  6.Simplified Chinese
  7.Spanish
  8.Swedish
  9.Traditional Chinese
  Please make a chioce (0-9),or press h or ? for help: 6
  #系统进入欢迎安装界面.
  并进行如下系统的环境配置项目:
  <网络,Kerberos安全性,名称服务,日期和时间,超级用户(root)口令,电源管理.>
  设置完成后,确认信息.
  在Solaris Install JumpStart控制台窗口中,启动JumpStart程序.
  进入安装欢迎界面.
  安装选项的设置:
  在软件安装后自动重新引导?
  yes or no
  软件安装完成后自动弹出其他CD/DVD?
  yes or no
  软件安装介质的选择:
  CD/DVD
  之后开始初始化安装,并开始安装的配置设置.
  接受软件许可证协议:
  接受
  #选择安装类型:
  自定义安装.
  #选择软件语言环境:
  亚洲--中文
  #选择附带软件:
  %Solaris 10 Extra Value Software
  %Solaris 10 Documentation
  %Java Enterprise System
  %Solaris Software Companion
  #Web Start Ready 产品扫描位置:要扫描其他产品,请选择您希望扫描的位置。在选取位置找到的产品是以WEB START READY的安装格式存在,它将被添加到“产品选择”面板中。
  无
  #选择Solaris软件组:
  整个群组以及OEM
  #选择安装磁盘:
  c1d0
  定制fdisk分区:
  选择整个硬盘空间为fdisk分区
  划分文件分区:
  eg: (单位:柱面,cylinder)
  片  文件系统  开始  大小
  0  /   3  5201
  1  swap   5205  1300
  2           backup   0  38748(149GB)
  #确认配置信息并准备安装:
  确认后进行Software 1的安装
  #安装Software 1后系统重新启动
  Software 1的安装日志在:
  The begin script log ''begin.log'' is located in /var/sadm/system/logs after reboot.
  The finish script log ''finish.log'' is located in /var/sadm/system/logs after reboot.
  #########################################
  此时将Software 1光盘取出,
  #########################################
  此时已经安装进去了系统的启动向导,类似双系统启动的界面:
  蓝色的SUN Microsystems背景
  % Solaris 10 1/06 s10x_u1wos_19a X86
  Solaris failsafe
  Use the up arrow and down arrow keys to select which entry is highlighted.
  Press enter to boot the selected OS, ''e'' to edit the commands before booting, or ''c'' for a command-line.
  The highlighted entry will be booted automatically in 10 secomds.
  break 中断 (ctrl+break恢复中断)
  系统可以进入到:
  Root password for system maintenannce (control-d to by pass):输入出超级用户密码
  可进入单用户命令行界面.
  #########################################
  放入Software 2
  #########################################
  此时已经安装进去了系统的启动向导,类似双系统启动的界面:
  蓝色的SUN Microsystems背景
  % Solaris 10 1/06 s10x_u1wos_19a X86
  Solaris failsafe
  Use the up arrow and down arrow keys to select which entry is highlighted.
  Press enter to boot the selected OS, ''e'' to edit the commands before booting, or ''c'' for a command-line.
  The highlighted entry will be booted automatically in 10 secomds.
  break 中断 (ctrl+break恢复中断)
  系统可以进入到:
  Root password for system maintenannce (control-d to by pass):输入出超级用户密码
  可进入单用户命令行界面.
  系统无法进行Software 2的安装.

  #########################################
  以上过程中hostid都为00000000,只有在重起系统后,放入Software 2的安装过程开始时系统会生成hostid.
  #########################################
  #########################################
  此时将Software 1光盘快速取出,
  在安装进去了系统的启动向导,类似双系统启动的界面的时候更换CDROM光盘
  放入Software 2
  系统将进入一个有关NFS的问询对话命令行界面:
  系统自动进入Software 2的安装界面
  #########################################
  命令行界面如下:
  SunOS Release 5.10 Version Generic_118844-26 64-bit
  Copyright 1983-2005 Sun Microsystems,Inc.  All rights reserved.
  User is subject to license terms.
  Hostname: changping-cr01
  Configuring devices.
  Loading smf(5) service descriptions: 90/90
  Creating new rsa public/private host key pair
  Creating new dsa public/private host key pair
  All devices are configured...
  This system is configured with NFS version 4, which uses a domain name that is automatically derived from the system''s name services. The derived domain name is sufficient for most configurations. In a few cases, mounts that cross different domains might cause files to be owned by "nobody" due to the lack of a common domain name.
  Do you need to override the system;s default NFS version 4 domain name (yes/no)? [no]:enter
  % Do you need to override the system;s default NFS version 4 domain name (yes/no)? [no]:yes
  给出domain名称即可eg: changping;之后系统可以继续进行安装.
  进入Software 2 的UGI图形安装界面:
  #确定安装Software 2,即可开始安装.
  #更换Software 3,Software 4, Language

0
相关文章