【IT168 服务器学院】由于公司里Solaris平台的应用服务器较多,工作时需要登录干活,下班在家也要时不时地使用系统资源,这就涉及到intranet网络安全性和使用方便性的二者权衡。为了构建一个相对安全的网络,笔者已经在所有服务器上安装了tcp wrapper软件,用以控制对客户端IP地址的限制,并将所有服务器的入口都局限于一台专用的登录服务器,而这台登录服务器则作为重点保护的入口主机。为了保证整个工作环境的安全,采用了openssh的两种验证方式相结合,对所有工作主机进行了整体的配置和保护。
实施步骤:
在每台服务器上
1. 安装软件包:
openssh-3.4pl-sol7-sparc-local
openssl-0.96d-sol7-sparc-local
zlib-1.1.4-sol7-sparc-local
prngd-0.0.25-sol7-sparc-local
egd-0.8-sol7-sparc-local
2. 安装prngd和sshd的启动脚本
::::::::::::::
S98prngd
::::::::::::::
#!/bin/sh
pid=`/usr/bin/ps -e | /usr/bin/grep prngd | /usr/bin/sed -e ''s/^ *//'' -e ''s/ .*//''`
case $1 in
''start'')
/usr/local/sbin/prngd /var/spool/prngd/pool
;;
''stop'')
if [ "${pid}" != "" ]
then
/usr/bin/kill ${pid}
fi
;;
*)
echo "usage: /etc/init.d/prngd {start|stop}"
;;
esac
::::::::::::::
S98sshd
::::::::::::::
#!/bin/sh
pid=`/usr/bin/ps -e | /usr/bin/grep sshd | /usr/bin/sed -e ''s/^ *//'' -e ''s/ .*//''`
case $1 in
''start'')
/usr/local/sbin/sshd
;;
''stop'')
if [ "${pid}" != "" ]
then
/usr/bin/kill ${pid}
fi
;;
*)
echo "usage: /etc/init.d/sshd {start|stop}"
;;
esac
3. 用prngd生成伪随机初始种子数
cat /var/log/syslog /var/adm/messages > /usr/local/etc/prngd/prngd-seed
mkdir /var/spool/prngd
/etc/rc2.d/S98prngd start
检查prngd工作是否正常: /usr/local/bin/egc.pl /var/spool/prngd/pool get
显示如: 9151 bits of entropy in pool
4. 增加sshd用户
mkdir /var/empty
chown root /var/empty
chgrp sys /var/empty
chmod 755 /var/empty
groupadd sshd
useradd –g sshd –c ‘sshd privsep’ –d /var/empty –s /bin/false sshd
5. 修改tcpd的控制文件/etc/hosts.allow和/etc/hosts.deny
ALL:n.n.n.n #登录主机IP
6. 在server端创建主机密钥对
ssh-keygen –t rsa1 –f /usr/local/etc/ssh_host_key –N “”
ssh-keygen –t dsa –f /usr/local/etc/ssh_host_dsa_key –N “”
ssh-keygen –t rsa –f /usr/local/etc/ssh_host_rsa_key –N “”
启动sshd:
/etc/rc2.d/S98sshd start
7. 关闭原telnet和ftp服务
修改/etc/inetd.conf 文件,kill –HUP <inetd pid>关闭telnet和ftp服务
8. 在客户端做以下测试
UNIX客户端:
Ssh [-l username] [-p port] <hostname> //如果用-v参数,进入调试状态,这是一个很好的帮助工具(取代telnet)
Sftp [-l username] [-p port] <hostname>(取代ftp)
WINDOWS:客户端
Securecrt 3.4.5 //在session的配置中,authentication使用password方式
Securefx2.0.3
以上为默认安装情况,即SSH的密码验证。
为了保证唯一的一台登录服务器的安全,又不至于在修改sshd配置后重启进程带来无法登录管理的问题,继续使用telnet和ftp服务,结合采用SSHD的密钥验证方式,并且在/etc/hosts.allow文件中做以下设置:
################# internal network ######################
ALL:n.n.n.n #operator1
ALL:n.n.n.n #operator2
################## out network ###########################
sshd: ALL #RSA auth
这样,管理员在公司的固定IP地址仍旧可以很方便地登录到主机上操作,而如果在家中或外出出差,由于IP地址是非固定的,可以通过sshd的密钥验证来进行登录。
服务器配置如下:
/usr/local/etc/sshd_config:
# $OpenBSD: sshd_config,v 1.56 2002/06/20 23:37:12 markus Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.
#Port 22
#Protocol 2,1
#ListenAddress 0.0.0.0
#ListenAddress ::
# HostKey for protocol version 1
HostKey /usr/local/etc/ssh_host_key
# HostKeys for protocol version 2
HostKey /usr/local/etc/ssh_host_rsa_key
HostKey /usr/local/etc/ssh_host_dsa_key
# Lifetime and size of ephemeral version 1 server key
KeyRegenerationInterval 3600
ServerKeyBits 768
# Logging
#obsoletes QuietMode and FascistLogging
SyslogFacility AUTH
LogLevel INFO
# Authentication:
#LoginGraceTime 600
#PermitRootLogin yes
#StrictModes yes
RSAAuthentication yes
PubkeyAuthentication yes
AuthorizedKeysFile .ssh/authorized_keys
# rhosts authentication should not be used
#RhostsAuthentication no
# Don''t read the user''s ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# For this to work you will also need host keys in /usr/local/etc/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don''t trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication yes
PermitEmptyPasswords no
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#AFSTokenPassing no
# Kerberos TGT Passing only works with the AFS kaserver
#KerberosTgtPassing no
# Set this to ''yes'' to enable PAM keyboard-interactive authentication
# Warning: enabling this may bypass the setting of ''PasswordAuthentication''
#PAMAuthenticationViaKbdInt yes
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#KeepAlive yes
#UseLogin no
UsePrivilegeSeparation yes
Compression yes
#MaxStartups 10
# no default banner path
#Banner /some/path
#VerifyReverseMapping no
# override default of no subsystems
Subsystem sftp /usr/local/libexec/sftp-server
这里关闭了SSH的密码验证方式,采用RSA的密钥验证方法,用户需要首先在服务器上用ssh-keygen –t rsa在自己的主目录下.ssh目录里自动生成密钥对,id_rsa(私钥)和id_rsa.pub(公钥),然后手工将id_rsa.pub拷贝成 autohrized_keys文件.并将id_rsa和id_rsa..pub文件传至客户端保存好,同时删除服务器端的id_rsa和 id_rsa.pub文件。
客户端测试:如果是UNIX客户端,将id_rsa和id_rsa.pub放在用户主目录的.ssh子目录下,
用ssh和sftp可以进行测试;如果是WINDOWS系统的客户端,可以通过SECURECRT指定authencation为 publickey方式,并且在properties中的session settings中选用use identity file,指定具体的id_rsa的文件位置,即可登录。这样,只有拥有密钥对的用户才可以登录。当然,得保护好自己的钥匙不可泄露,为安全起见,服务器需要定时改变每个用户的密钥。
通过以上对intranet内部服务器的安全配置,实现了安全性和方便性的整合。